Another project combining steel with fused glass. The steel background is 22” by 28”. It consists of 1/8” steel plate with ¾” by 1/8” steel strap welded around the perimeter. The fit was not perfect, but I was able to bridge the gap with welding. Sometimes it takes a second attempt to eliminate the welding flaws. The surface was ground eliminating the mill scale leaving a shiny surface. The surface was painted using a transparent air brush paint. Then multiple coats of DuPont ChromaClear were sprayed on over the entire surface leaving a high gloss finish.
![](https://zannjones.com/wp-content/uploads/2021/04/image-58.jpeg)
![](https://zannjones.com/wp-content/uploads/2021/04/image-59.jpeg)
![](https://zannjones.com/wp-content/uploads/2021/04/image-61.jpeg)
![](https://zannjones.com/wp-content/uploads/2021/04/image-60.jpeg)
![](https://zannjones.com/wp-content/uploads/2021/04/image-62.jpeg)