I removed the original vent register and installed the custom one. It slides into the sheet metal ductwork.
![](https://zannjones.com/wp-content/uploads/2021/04/image-3.jpeg)
Test fitting the customer vent register before painting.
![](https://zannjones.com/wp-content/uploads/2021/04/image-4.jpeg)
Welding the rocket to the vent casing.
![](https://zannjones.com/wp-content/uploads/2021/04/image-5.jpeg)
The head and eyes are half sphere. After the eyes are welded to the head, the welds are ground smooth with the head.
![](https://zannjones.com/wp-content/uploads/2021/04/image-6.jpeg)
![](https://zannjones.com/wp-content/uploads/2021/04/image-7.jpeg)